Short corner branch 88° DN100 x 100 x 100 - PAM-GLOBAL S

Code article : 155860

Description

The long tail corner branches of the PAM GLOBAL S range are cast iron components, allowing the lateral connection of two perpendicular pipes of the same DN with the specified angle and a possible cutting area. The elongated shank of the piece allows: height adjustment to construction tolerances, 360° rotation to facilitate the positioning of the panties in relation to the location of the equipment, thelower connection outside the slab for the interlocking of the pieces or the laying of the joints thus eliminating accessibility problems, non-destructive interventions on slabs and ceilings during subsequent interventions.

Technical infos & product description

Product description

The long tail corner branches of the PAM GLOBAL S range are cast iron components, allowing the lateral connection of two perpendicular pipes of the same DN with the specified angle and a possible cutting area. The elongated shank of the piece allows: height adjustment to construction tolerances, 360° rotation to facilitate the positioning of the panties in relation to the location of the equipment, thelower connection outside the slab for the interlocking of the pieces or the laying of the joints thus eliminating accessibility problems, non-destructive interventions on slabs and ceilings during subsequent interventions.

Recommended use :

  • Domestic use
  • Fat Wastewater
  • Hot effluents
  • Rainwater
  • Runoff water

Major benefits :

  • Performances guaranteed with marks delivered by third party.
  • High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
  • Best acoustic comfort.
  • Easiness of installation due to mechanical couplings assembled with simple tools.
  • Adaptable to all configurations with available accessories connecting cast iron with other materials.
  • Limited maintenance operation thanks to technical and mechanical properties of cast iron.

Technical infos

  • Hot water resistance: 24h at 95°C.
  • Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
  • Chemical resistance for 2 ≤ pH ≤ 12.
  • Salt spray resistance: more than 350h.

Coating description :

  • External coating : Red-brown, anti-corrosive acrylic primer paint, average dry film thickness 40 μm.

  • Internal coating : Two-component ochre colored epoxy coating, average dry film thickness of 130 μm.

  • Material : Cast-iron made with De Lavaud process
  • Industry product standards : DIN EN 877
  • Range Fire Classification : A1
  • Acoustic Performance : Lsc ≤ 5dB(A) according to EN 14366
  • Percentage of Recycled Content : 97%
  • Recycling Information : 100% Recyclable