Bend 88° x DN 150mm - ITINERO

Article	DN	dn	Angle	Length	Height	Width	Weight
254029	100	-	88	166	169	110	2.2
248431	150	-	88	227	230	160	4.3
248432	200	-	88	288	291	210	8.1
248434	250	-	88	360	363	274	13.5
248435	300	-	88	427	431	326	27.7
248775	400	-	88	644	651	429	59

All dimensions are in mm and nominal weights are in kg

Product description

Short radius bends of the ITINERO range are cast iron fittings allowing a change of direction of the fluid, with the indicated angle. These fittings are coated with a concrete grey polymerized epoxy film applied by powder coating (300μm on average).

Recommended use :

• Rainwater

Major benefits :

• Performances guaranteed with marks delivered by third party.
• Long lifetime with high resistance to climatic stresses due to the zinc coating and the low thermal expansion coefficient of cast iron.
• Low maintenance due to the best in class resistance to shocks and crushing.
• High level of fire safety.
• Suitable to many bridge and tunnel design and adapted to renovation projects.
• Easy to install due to mechanical couplings assembled with simple tools.

Technical infos

• Hot water resistance : 24h at 95°C.
• Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
• Chemical resistance for 2 ≤ pH ≤ 12.
• Salt spray resistance : 3000h.

Coating description :

• External coating : 
• Grey (approximate RAL 7030), anti-corrosive acrylic primer paint, average dry film thickness of 40 μm.
• Anti-corrosive zinc coating of 260gr/m2 (about 40 μm).

• Internal coating: epoxy coating, average dry film thickness of 130 μm.

• Material :
• Industry product standards :
• Range Fire Classification : A2-s1,d0
• Acoustic Performance :
• Percentage of Recycled Content : 97%
• Recycling Information : 97%