Blank end DN 125mm - SMU PLUS

Code article : 267057

Description

The Blank ends of the SMU PLUS range are used to temporarily or permanently seal the connections of pipes and fittings used on gravity drainage networks.

These fittings are coated internally and externally with an anthracite grey polymerised epoxy film applied by powder coating (300μm on average).

Product variants

Article DN dn Angle Length Height Width Weight
267053 50 - - 58 30 58 0.25
267055 75 - - 83 35 83 0.45
155350 120 - - 110 40 110 0.8
267057 125 - - 135 45 135 1.2
155416 150 - - 160 50 160 1.7
155449 200 - - 210 60 210 3.2
155477 250 - - 274 70 274 5.9
155494 300 - - 326 80 326 10

All dimensions are in mm and nominal weights are in kg

Technical infos & product description

Product description

The Blank ends of the SMU PLUS range are used to temporarily or permanently seal the connections of pipes and fittings used on gravity drainage networks.

These fittings are coated internally and externally with an anthracite grey polymerised epoxy film applied by powder coating (300μm on average).

Recommended use :

  • Soil and drain
  • Intensive Use
  • Aggressive effluents
  • Standard Use
  • Domestic use
  • Rainwater

Major benefits :

  • Performances guaranteed with marks delivered by third party.
  • Long lasting operational safety thanks to the robustness and stiffness (around 700kN.m) of cast iron and usage of flexible mechanical couplings.
  • High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
  • Best acoustic comfort.
  • Easiness of installation due to mechanical couplings assembled with simple tools.

Technical infos

  • Hot water resistance : 24h at 95°C.
  • Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
  • Chemical resistance for 2 ≤ pH ≤ 13, up to 80°C.
  • Salt spray resistance : 1500h.

Coating description :

  • External coating :
    • Grey, anti-corrosive acrylic primer paint, average dry film thickness of 40 μm
    • Anti-corrosive zinc coating of 130gr/m2
  • Internal coating : Two-component
  • Material :
  • Industry product standards :
  • Range Fire Classification : A2-s1,d0
  • Acoustic Performance : Lsc ≤ 5dB(A) according to EN 14366
  • Percentage of Recycled Content : 97%
  • Recycling Information : 97%