Single long arm branch 45° x DN 100 x 100 - SMU PLUS

Article	DN	dn	Angle	Length	Height	Width	Weight
155389	100	-	-	282	450	110	6

All dimensions are in mm and nominal weights are in kg

Product description

The single long arm branches of the SMU PLUS range, a cast iron component, which allows the drop/collector junction by reducing to its minimum the distance between the collector water wire and the underside of the slab . In the case of long horizontal collectors, the size of the pipes is considerably reduced, for the same coefficient of flow slope.

Recommended use :

• Aggressive effluents
• Fat Wastewater
• Hot effluents
• Industrial Wastewater
• Corrosive atmosphere

Major benefits :

• Performances guaranteed with marks delivered by third party.
• Long lasting operational safety thanks to the robustness and stiffness (around 700kN.m) of cast iron and usage of flexible mechanical couplings.
• High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
• Best acoustic comfort.
• Easiness of installation due to mechanical couplings assembled with simple tools.

Technical infos

• Hot water resistance : 24h at 95°C.
• Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
• Chemical resistance for 2 ≤ pH ≤ 13, up to 80°C.
• Salt spray resistance : 1500h.

Coating description :

• External coating :
• Grey, anti-corrosive acrylic primer paint, average dry film thickness of 40 μm
• Anti-corrosive zinc coating of 130gr/m2

• Internal coating : Two-component

• Material : Cast-iron made with De Lavaud process
• Industry product standards : NF EN877
• Range Fire Classification : A2-s1,d0
• Acoustic Performance : Lsc ≤ 5dB(A) according to EN 14366
• Percentage of Recycled Content : 97%
• Recycling Information : 100% Recyclable