Double Bend 88° x DN 75mm - SMU PLUS

Article	DN	dn	Angle	Length	Height	Width	Weight
235800	50	-	88	148	148	58	1
155359	100	-	88	228	228	110	2.8
155422	150	-	88	303	303	160	6.3
235801	75/80	-	88	183	183	83	1.5

All dimensions are in mm and nominal weights are in kg

Product description

SMU PLUS double bends with 88° cast iron connections, replace 2 single bend at 45° and save time during installation. They are coated with an anthracite grey polymerised epoxy film applied by powder coating. This part allows the elimination of a joint and a claw collar.

Recommended use :

• Aggressive effluents
• Fat Wastewater
• Hot effluents
• Industrial Wastewater
• Corrosive atmosphere

Major benefits :

• Performances guaranteed with marks delivered by third party.
• Long lasting operational safety thanks to the robustness and stiffness (around 700kN.m) of cast iron and usage of flexible mechanical couplings.
• High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
• Best acoustic comfort.
• Easiness of installation due to mechanical couplings assembled with simple tools.

Technical infos

• Hot water resistance : 24h at 95°C.
• Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
• Chemical resistance for 2 ≤ pH ≤ 13, up to 80°C.
• Salt spray resistance : 1500h.

Coating description :

• External coating :
• Grey, anti-corrosive acrylic primer paint, average dry film thickness of 40 μm
• Anti-corrosive zinc coating of 130gr/m2

• Internal coating : Two-component

• Material : Cast-iron made with De Lavaud process
• Industry product standards : NF EN877
• Range Fire Classification : A2-s1,d0
• Acoustic Performance : Lsc ≤ 5dB(A) according to EN 14366
• Percentage of Recycled Content : 97%
• Recycling Information : 100% Recyclable