Trap branch trap DN 75mm - SMU S

Article	DN	dn	Angle	Length	Height	Width	Weight
156420	50	-	-	190	240	58	2.5
156519	75	-	-	264	282	80	4.6
156668	100	-	-	325	381	110	7.9
156801	125	-	-	390	435	134	10.7
156912	150	-	-	470	482	160	16.9
157018	200	-	-	600	590	210	34.3

All dimensions are in mm and nominal weights are in kg

Product description

The SMU S branch trap are cast iron components which allows the conservation of a water trap preventing the rise of odours. The trap can be connected to either the horizontal or the vertical flow stream and directed in different directions by means of bends. The unused inlet is to be closed off with a blank end of socket plug. The trap is fitted with a cleaning plug at the base.

Recommended use :

• Soil and drain
• Standard Use
• Domestic use
• Intensive Use
• Fat Wastewater
• Rainwater

Major benefits :

• Performances guaranteed with marks delivered by third party.
• High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
• Best acoustic comfort.
• Easiness of installation due to mechanical couplings assembled with simple tools.
• Adaptable to all configurations with available accessories connecting cast iron with other materials.
• Limited maintenance operation thanks to technical and mechanical properties of cast iron.

Technical infos

• Hot water resistance: 24h at 95°C.
• Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
• Chemical resistance for 2 ≤ pH ≤ 12.
• Salt spray resistance: more than 350h.

Coating description :

• External coating : Red-brown, anti-corrosive acrylic primer paint, average dry film thickness 40 μm.

• Internal coating : Two-component ochre colored epoxy coating, average dry film thickness of 130 μm.

• Material :
• Industry product standards :
• Range Fire Classification : A1
• Acoustic Performance : Lsc ≤ 5dB(A) according to EN 14366
• Percentage of Recycled Content : 97%
• Recycling Information : 97%