Trap branch trap DN 150mm - SMU S

Code article : 156912

Description

Part of the Standard drainage system, designed for rainwater networks, the SMU S branch trap allows the conservation of a water trap preventing the rise of odours. Bottom cleaning access is either an Expansion Plug (EP) or Tight Sheet (TS). It is made of cast iron coated with a reddish-brown epoxy film applied by cataphoresis and are indefinitely and fully recyclable. The trap can be connected to either the horizontal or the vertical flow stream and directed in different directions by means of bends. The unused inlet is to be closed off with a blank end of socket plug. The trap is fitted with a cleaning plug at the base. PAM Building cast iron SMU S range complies with European standard EN 877 and has remarkable fire protection properties as well as exceptional acoustic performances.

Product variants

Article DN dn Angle Length Height Width Weight
156420 50 - - 190 240 58 2.5
156519 75 - - 264 282 83 4.6
156668 100 - - 325 381 110 7.9
156801 125 - - 390 435 135 10.7
156912 150 - - 470 482 160 16.9
157018 200 - - 600 590 210 34.3

All dimensions are in mm and nominal weights are in kg

Technical infos & product description

Product description

Part of the Standard drainage system, designed for rainwater networks, the SMU S branch trap allows the conservation of a water trap preventing the rise of odours. Bottom cleaning access is either an Expansion Plug (EP) or Tight Sheet (TS). It is made of cast iron coated with a reddish-brown epoxy film applied by cataphoresis and are indefinitely and fully recyclable. The trap can be connected to either the horizontal or the vertical flow stream and directed in different directions by means of bends. The unused inlet is to be closed off with a blank end of socket plug. The trap is fitted with a cleaning plug at the base. PAM Building cast iron SMU S range complies with European standard EN 877 and has remarkable fire protection properties as well as exceptional acoustic performances.

Recommended use :

  • Valve water
  • Rainwater
  • Wastewater

Major benefits :

  • Performances guaranteed with marks delivered by third party.
  • High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
  • Best acoustic comfort.
  • Easiness of installation due to mechanical couplings assembled with simple tools.
  • Adaptable to all configurations with available accessories connecting cast iron with other materials.
  • Limited maintenance operation thanks to technical and mechanical properties of cast iron.

Technical infos

  • Hot water resistance: 24h at 95°C. 
  • Thermal cycle resistance: 1500 cycles between 15°C and 93°C. 
  • Chemical resistance for 2 ≤ pH ≤ 12. 
  • Salt spray resistance internal coating: more than 350 h

Coating description :

Coating: red-brown, anti-corrosive cataphoresis epoxy, average dry film thickness 70 μm.
  • Material : Cast-iron
  • Industry product standards : NF EN877
  • Range Fire Classification :
  • Acoustic Performance : Lsc,A < 10 dB(A) & La,A = 47 dB(A) according to EN 14366 with 2 l/s.
  • Percentage of Recycled Content : 99%
  • Recycling Information : Cast iron is 100% recyclable through the existing recycling industrial network. 
    Data source: Environmental Product Declaration S-P-02013