Blank end DN 75mm - SMU S

Code article : 156466

Description

The Blank ends of the SMU S range, cast iron components, are used to temporarily or permanently seal the connections of pipes and fittings used on gravity drainage networks. They are coated with a reddish-brown epoxy film deposited by reinforced cataphoresis.

Product variants

Article DN dn Angle Length Height Width Weight
156376 50 - - 58 30 58 0.25
156466 75 - - 83 35 83 0.45
156581 120 - - 110 40 110 0.8
156749 125 - - 135 45 135 1.2
156841 150 - - 160 50 160 1.7
156963 200 - - 210 60 210 3.2
157062 250 - - 274 70 274 5.9
157127 300 - - 326 80 326 10

All dimensions are in mm and nominal weights are in kg

Technical infos & product description

Product description

The Blank ends of the SMU S range, cast iron components, are used to temporarily or permanently seal the connections of pipes and fittings used on gravity drainage networks. They are coated with a reddish-brown epoxy film deposited by reinforced cataphoresis.

Recommended use :

  • Valve water
  • Wastewater
  • Rainwater

Major benefits :

  • Performances guaranteed with marks delivered by third party.
  • High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
  • Best acoustic comfort.
  • Easiness of installation due to mechanical couplings assembled with simple tools.
  • Adaptable to all configurations with available accessories connecting cast iron with other materials.
  • Limited maintenance operation thanks to technical and mechanical properties of cast iron.

Technical infos

  • Hot water resistance: 24h at 95°C.
  • Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
  • Chemical resistance for 2 ≤ pH ≤ 12.
  • Salt spray resistance: more than 350h.

Coating description :

  • External coating : Red-brown, anti-corrosive acrylic primer paint, average dry film thickness 40 μm.

  • Internal coating : Two-component ochre colored epoxy coating, average dry film thickness of 130 μm.

  • Material : Cast-iron made with De Lavaud process
  • Industry product standards : NF EN877
  • Range Fire Classification : A1
  • Acoustic Performance : Lsc ≤ 5dB(A) according to EN 14366
  • Percentage of Recycled Content : 97%
  • Recycling Information : 100% Recyclable