Blank end DN 250mm - SMU S

Article	DN	dn	Angle	Length	Height	Width	Weight
156376	50	-	-	58	30	58	0.25
156466	75	-	-	83	35	83	0.45
156581	120	-	-	110	40	110	0.8
156749	125	-	-	135	45	135	1.2
156841	150	-	-	160	50	160	1.7
156963	200	-	-	210	60	210	3.2
157062	250	-	-	274	70	274	5.9
157127	300	-	-	326	80	326	10

All dimensions are in mm and nominal weights are in kg

Product description

The Blank ends of the SMU S range, cast iron components, are used to temporarily or permanently seal the connections of pipes and fittings used on gravity drainage networks. They are coated with a reddish-brown epoxy film deposited by reinforced cataphoresis.

Recommended use :

• Valve water
• Wastewater
• Rainwater

Major benefits :

• Performances guaranteed with marks delivered by third party.
• High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
• Best acoustic comfort.
• Easiness of installation due to mechanical couplings assembled with simple tools.
• Adaptable to all configurations with available accessories connecting cast iron with other materials.
• Limited maintenance operation thanks to technical and mechanical properties of cast iron.

Technical infos

• Hot water resistance: 24h at 95°C.
• Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
• Chemical resistance for 2 ≤ pH ≤ 12.
• Salt spray resistance: more than 350h.

Coating description :

• External coating : Red-brown, anti-corrosive acrylic primer paint, average dry film thickness 40 μm.

• Internal coating : Two-component ochre colored epoxy coating, average dry film thickness of 130 μm.

• Material : Cast-iron made with De Lavaud process
• Industry product standards : NF EN877
• Range Fire Classification : A1
• Acoustic Performance : Lsc ≤ 5dB(A) according to EN 14366
• Percentage of Recycled Content : 97%
• Recycling Information : 100% Recyclable