Long tail single branch 45° x DN 100 x 100 - SMU S

Code article : 156723

Description

The long tail single branches of the SMU S range are cast iron components, allowing lateral connection of a pipe of the same DN, with the indicated angle and possible cutting area. The elongated shaft of the part allows: height adaptation to construction tolerances, 360° rotation to facilitate the positioning of the panty in relation to the location of the equipment, lower connection outside the slab for the interlocking of the parts or the installation of the joints thus eliminating accessibility problems, non-destructive interventions on slabs and ceilings during subsequent interventions.

Product variants

Article DN dn Angle Length Height Width Weight
156723 100 - 45 238 430 110 5.3
157036 150 - 45 323 705 110 18.3
156938 200 - 45 423 770 110 26

All dimensions are in mm and nominal weights are in kg

Technical infos & product description

Product description

The long tail single branches of the SMU S range are cast iron components, allowing lateral connection of a pipe of the same DN, with the indicated angle and possible cutting area. The elongated shaft of the part allows: height adaptation to construction tolerances, 360° rotation to facilitate the positioning of the panty in relation to the location of the equipment, lower connection outside the slab for the interlocking of the parts or the installation of the joints thus eliminating accessibility problems, non-destructive interventions on slabs and ceilings during subsequent interventions.

Recommended use :

  • Valve water
  • Wastewater
  • Rainwater

Major benefits :

  • Performances guaranteed with marks delivered by third party.
  • High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
  • Best acoustic comfort.
  • Easiness of installation due to mechanical couplings assembled with simple tools.
  • Adaptable to all configurations with available accessories connecting cast iron with other materials.
  • Limited maintenance operation thanks to technical and mechanical properties of cast iron.

Technical infos

  • Hot water resistance: 24h at 95°C.
  • Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
  • Chemical resistance for 2 ≤ pH ≤ 12.
  • Salt spray resistance: more than 350h.

Coating description :

  • External coating : Red-brown, anti-corrosive acrylic primer paint, average dry film thickness 40 μm.

  • Internal coating : Two-component ochre colored epoxy coating, average dry film thickness of 130 μm.

  • Material : Cast-iron made with De Lavaud process
  • Industry product standards : NF EN877
  • Range Fire Classification : A1
  • Acoustic Performance : Lsc ≤ 5dB(A) according to EN 14366
  • Percentage of Recycled Content : 97%
  • Recycling Information : 100% Recyclable