Double bend 88° x DN 75mm - SMU S

Code article : 171621

Description

The double bends of the SMU S range are coated with a cataphoretically deposited epoxy film with an average thickness of 70 microns and a reddish-brown colour. Their double opening allows pipes to be connected on both sides to facilitate evacuationfrom different buildings.

The SMU Sbend allow a change of direction of the conveyed fluid, with the indicatedangle, while maintaining quality and reliability, thanks to the brown-red epoxyfilm deposited by cataphoresis used in the coating.

Product variants

Article DN dn Angle Length Height Width Weight
235797 50 - 88 148 148 58 1
233647 100 - 88 228 228 110 2.8
233648 125 - 88 265 265 135 4.4
233649 150 - 88 303 303 160 6.3
171621 75/80 - 88 183 183 83 1.5

All dimensions are in mm and nominal weights are in kg

Technical infos & product description

Product description

The double bends of the SMU S range are coated with a cataphoretically deposited epoxy film with an average thickness of 70 microns and a reddish-brown colour. Their double opening allows pipes to be connected on both sides to facilitate evacuationfrom different buildings.

The SMU Sbend allow a change of direction of the conveyed fluid, with the indicatedangle, while maintaining quality and reliability, thanks to the brown-red epoxyfilm deposited by cataphoresis used in the coating.

Recommended use :

  • Soil and drain
  • Standard Use
  • Domestic use
  • Intensive Use
  • Fat Wastewater
  • Rainwater

Major benefits :

  • Performances guaranteed with marks delivered by third party.
  • High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
  • Best acoustic comfort.
  • Easiness of installation due to mechanical couplings assembled with simple tools.
  • Adaptable to all configurations with available accessories connecting cast iron with other materials.
  • Limited maintenance operation thanks to technical and mechanical properties of cast iron.

Technical infos

  • Hot water resistance: 24h at 95°C.
  • Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
  • Chemical resistance for 2 ≤ pH ≤ 12.
  • Salt spray resistance: more than 350h.

Coating description :

  • External coating : Red-brown, anti-corrosive acrylic primer paint, average dry film thickness 40 μm.

  • Internal coating : Two-component ochre colored epoxy coating, average dry film thickness of 130 μm.

  • Material :
  • Industry product standards :
  • Range Fire Classification : A1
  • Acoustic Performance : Lsc ≤ 5dB(A) according to EN 14366
  • Percentage of Recycled Content : 97%
  • Recycling Information : 97%