Offset bend DN 100 x 200mm - SMU S

Article	DN	dn	Angle	Length	Height	Width	Weight
156386	50	-	-	133	185	58	1.1
156478	75	-	-	158	200	83	1.5
156482	75	-	-	233	230	83	2.3
156596	100	-	-	185	215	110	2.5
155822	100	-	-	310	340	110	4.2
156604	100	-	-	260	250	110	3.3
156602	100	-	-	240	270	110	3.7
156759	125	-	-	210	236	135	3.7
156764	125	-	-	285	270	135	4.8
156853	150	-	-	235	255	160	5.1
156858	150	-	-	310	300	160	6.7
156972	200	-	-	285	295	210	8.3
156976	200	-	-	360	350	210	10.8

All dimensions are in mm and nominal weights are in kg

Product description

Part of the Standard drainage system, the SMU S offset bend allows a change in position of the pipe run for those times you cannot plan a direct route fluid. The cast iron fittings are coated with a reddish-brown epoxy film applied by cataphoresis and are fully and indefinitely recyclable. PAM Building cast iron SMU S range complies with European standard EN 877 and has remarkable fire protection properties as well as exceptional acoustic performances. 

Recommended use :

• Rainwater
• Valve water
• Wastewater

Major benefits :

• Performances guaranteed with marks delivered by third party.
• High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
• Best acoustic comfort.
• Easiness of installation due to mechanical couplings assembled with simple tools.
• Adaptable to all configurations with available accessories connecting cast iron with other materials.
• Limited maintenance operation thanks to technical and mechanical properties of cast iron.

Technical infos

• Hot water resistance: 24h at 95°C. 
• Thermal cycle resistance: 1500 cycles between 15°C and 93°C. 
• Chemical resistance for 2 ≤ pH ≤ 12. 
• Salt spray resistance internal coating: more than 350 h.

Coating description :

Coating: red-brown, anti-corrosive cataphoresis epoxy, average dry film thickness 70 μm.

• Material : Cast-iron
• Industry product standards : NF EN877
• Range Fire Classification : Euroclass A1
• Acoustic Performance : Lsc ≤ 10 dB(A) & LaA = 47 dB(A) according to EN 14366 with 2L/s.
• Percentage of Recycled Content : 99%
• Recycling Information : Cast iron is 100% recyclable through the existing recycling industrial network. 
  Data source: Environmental Product Declaration S-P-02013