Manifold Ensign Soil Multi-Waste Connector 150mm

Code article : 261434

Description

The ENSIGN SOIL cast iron multi-connectors, save space by grouping waste pipes from various sources. The space is saved by allowing the grouping of evacuations of small diameter pipework from various devices such as sinks, basins, bidets, urinals or showers on two a single point.

  • The multi-connector allows the horizontal connection of up to six waste pipes - 3 either side, therefore can be used on soil stacks that service two back to back flats/apartments.
  • The horizontal connections mean the waste pipes can be installed below the floor level to maximise space saving.
  • The manifold contains and internal baffle allowing the use of all 6 waste inlets eliminating any cross flow.
  • The manifold is supplied with 5 blanking plugs.
  • Extended spigot capable of penetrating a floor slab depth of up to 400mm that eliminates the need for a joint in the slab.
  • The spigot has 10mm increment markers to assist reducing the overall length to suit smaller slab depths.

Product variants

Article DN dn Angle Length Height Width Weight
261138 100 - - 445 582 445 12.8
261434 150 - - 445 591 445 17.3

All dimensions are in mm and nominal weights are in kg

Technical infos & product description

Product description

The ENSIGN SOIL cast iron multi-connectors, save space by grouping waste pipes from various sources. The space is saved by allowing the grouping of evacuations of small diameter pipework from various devices such as sinks, basins, bidets, urinals or showers on two a single point.

  • The multi-connector allows the horizontal connection of up to six waste pipes - 3 either side, therefore can be used on soil stacks that service two back to back flats/apartments.
  • The horizontal connections mean the waste pipes can be installed below the floor level to maximise space saving.
  • The manifold contains and internal baffle allowing the use of all 6 waste inlets eliminating any cross flow.
  • The manifold is supplied with 5 blanking plugs.
  • Extended spigot capable of penetrating a floor slab depth of up to 400mm that eliminates the need for a joint in the slab.
  • The spigot has 10mm increment markers to assist reducing the overall length to suit smaller slab depths.

Recommended use :

  • Aggressive effluents
  • Domestic use
  • Fat Wastewater
  • Hot effluents
  • Industrial Wastewater
  • Rainwater
  • Runoff water

Major benefits :

  • Performances guaranteed with marks delivered by third party.
  • Long lasting operational safety thanks to the robustness and stiffness (around 700kN.m) of cast iron and usage of flexible mechanical couplings.
  • High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
  • Best acoustic comfort.
  • Easiness of installation due to mechanical couplings assembled with simple tools.

Technical infos

  • Hot water resistance : 24h at 95°C.
  • Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
  • Chemical resistance for 2 ≤ pH ≤ 13, up to 80°C.
  • Salt spray resistance : 1500h.

Coating description :

  • External coating : Red-brown, anti-corrosive acrylic primer paint, average dry film thickness 40 μm.

  • Internal coating : Two-component ochre colored epoxy coating, average dry film thickness of 130 μm.

  • Material : Cast-iron made with De Lavaud process
  • Industry product standards : BS EN877
  • Range Fire Classification : A1
  • Acoustic Performance : Lsc ≤ 5dB(A) according to EN 14366
  • Percentage of Recycled Content : 97%
  • Recycling Information : 100% Recyclable