Blank end DN 50mm - ENSIGN SOIL

Article	DN	dn	Angle	Length	Height	Width	Weight
191570	50	-	-	58	30	58	0.25
191571	70	-	-	78	35	78	0.4
191572	120	-	-	110	40	110	0.8
191573	125	-	-	135	45	135	1.2
191574	150	-	-	160	50	160	1.7
191575	200	-	-	210	60	210	3.2
191576	250	-	-	274	70	274	5.9
191569	300	-	-	326	80	326	10

All dimensions are in mm and nominal weights are in kg

Product description

The Blank ends of the ENSIGN SOIL range, cast iron components, are used to temporarily or permanently seal the connections of pipes and fittings used on gravity drainage networks. They are coated with a reddish-brown epoxy film deposited by reinforced cataphoresis.

Recommended use :

• Aggressive effluents
• Domestic use
• Fat Wastewater
• Hot effluents
• Industrial Wastewater
• Rainwater
• Runoff water

Major benefits :

• Performances guaranteed with marks delivered by third party.
• Long lasting operational safety thanks to the robustness and stiffness (around 700kN.m) of cast iron and usage of flexible mechanical couplings.
• High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
• Best acoustic comfort.
• Easiness of installation due to mechanical couplings assembled with simple tools.

Technical infos

• Hot water resistance : 24h at 95°C.
• Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
• Chemical resistance for 2 ≤ pH ≤ 13, up to 80°C.
• Salt spray resistance : 1500h.

Coating description :

• External coating : Red-brown, anti-corrosive acrylic primer paint, average dry film thickness 40 μm.

• Internal coating : Two-component ochre colored epoxy coating, average dry film thickness of 130 μm.

• Material : Cast-iron made with De Lavaud process
• Industry product standards : BS EN877
• Range Fire Classification : A1
• Acoustic Performance : Lsc ≤ 5dB(A) according to EN 14366
• Percentage of Recycled Content : 97%
• Recycling Information : 100% Recyclable