Blank end DN 200mm - ENSIGN SOIL

Code article : 191575

Description

The Blank ends of the ENSIGN SOIL range, cast iron components, are used to temporarily or permanently seal the connections of pipes and fittings used on gravity drainage networks. They are coated with a reddish-brown epoxy film deposited by reinforced cataphoresis.

Product variants

Article DN dn Angle Length Height Width Weight
191570 50 - - 58 30 58 0.25
191571 70 - - 78 35 78 0.4
191572 120 - - 110 40 110 0.8
191573 125 - - 135 45 135 1.2
191574 150 - - 160 50 160 1.7
191575 200 - - 210 60 210 3.2
191576 250 - - 274 70 274 5.9
191569 300 - - 326 80 326 10

All dimensions are in mm and nominal weights are in kg

Technical infos & product description

Product description

The Blank ends of the ENSIGN SOIL range, cast iron components, are used to temporarily or permanently seal the connections of pipes and fittings used on gravity drainage networks. They are coated with a reddish-brown epoxy film deposited by reinforced cataphoresis.

Recommended use :

  • Aggressive effluents
  • Domestic use
  • Fat Wastewater
  • Hot effluents
  • Industrial Wastewater
  • Rainwater
  • Runoff water

Major benefits :

  • Performances guaranteed with marks delivered by third party.
  • Long lasting operational safety thanks to the robustness and stiffness (around 700kN.m) of cast iron and usage of flexible mechanical couplings.
  • High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
  • Best acoustic comfort.
  • Easiness of installation due to mechanical couplings assembled with simple tools.

Technical infos

  • Hot water resistance : 24h at 95°C.
  • Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
  • Chemical resistance for 2 ≤ pH ≤ 13, up to 80°C.
  • Salt spray resistance : 1500h.

Coating description :

  • External coating : Red-brown, anti-corrosive acrylic primer paint, average dry film thickness 40 μm.

  • Internal coating : Two-component ochre colored epoxy coating, average dry film thickness of 130 μm.

  • Material : Cast-iron made with De Lavaud process
  • Industry product standards : BS EN877
  • Range Fire Classification : A1
  • Acoustic Performance : Lsc ≤ 5dB(A) according to EN 14366
  • Percentage of Recycled Content : 97%
  • Recycling Information : 100% Recyclable