Short radius bend 15° x DN 200 - ENSIGN SOIL

Article	DN	dn	Angle	Length	Height	Width	Weight
191433	50	-	15	66	80	58	0.4
191438	75	-	15	93	99	83	0.68
191443	100	-	15	121	112	110	1
191455	150	-	15	173	148	160	2.5
155932	200	-	15	227	184	210	4.6

All dimensions are in mm and nominal weights are in kg

Product description

The short radius bends of the ENSIGN SOIL range allows a change of direction of the conveyed fluid, with the indicated angle, while maintaining quality and reliability, thanks to the brown-red epoxy film deposited by cataphoresis used in the coating.

Recommended use :

• Soil and drain
• Intensive Use
• Aggressive effluents
• Standard Use
• Domestic use
• Rainwater

Major benefits :

• Performances guaranteed with marks delivered by third party.
• Long lasting operational safety thanks to the robustness and stiffness (around 700kN.m) of cast iron and usage of flexible mechanical couplings.
• High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
• Best acoustic comfort.
• Easiness of installation due to mechanical couplings assembled with simple tools.

Technical infos

• Hot water resistance : 24h at 95°C.
• Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
• Chemical resistance for 2 ≤ pH ≤ 13, up to 80°C.
• Salt spray resistance : 1500h.

Coating description :

• External coating : Red-brown, anti-corrosive acrylic primer paint, average dry film thickness 40 μm.

• Internal coating : Two-component ochre colored epoxy coating, average dry film thickness of 130 μm.

• Material :
• Industry product standards :
• Range Fire Classification : A1
• Acoustic Performance : Lsc ≤ 5dB(A) according to EN 14366
• Percentage of Recycled Content : 97%
• Recycling Information : 97%