Short radius bend 30° x DN 250 - ENSIGN SOIL

Article	DN	dn	Angle	Length	Height	Width	Weight
191434	50	-	30	76	97	58	0.5
191439	75	-	30				0.8
191444	100	-	30	132	136	110	1.3
191456	150	-	30	189	188	160	3
155933	200	-	30	243	229	210	5.4
155948	250	-	30	309	270	274	9.7

All dimensions are in mm and nominal weights are in kg

Product description

Part of the standard range, the PAM GLOBAL S 30° short radius bend allows a change of direction of the fluid waste and rainwater through buildings. The cast iron fittings are coated by cataphoresis and are fully and indefinitely recyclable.

Recommended use :

• Rainwater
• Valve water
• Wastewater

Major benefits :

• Performances guaranteed with marks delivered by third party.
• High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
• Best acoustic comfort.
• Easiness of installation due to mechanical couplings assembled with simple tools.
• Adaptable to all configurations with available accessories connecting cast iron with other materials.
• Limited maintenance operation thanks to technical and mechanical properties of cast iron.

Technical infos

• Hot water resistance: 24h at 95°C. 
• Thermal cycle resistance: 1500 cycles between 15°C and 93°C. 
• Chemical resistance for 2 ≤ pH ≤ 12. 
• Salt spray resistance internal coating: more than 350 h

Coating description :

Coating: red-brown, anti-corrosive cataphoresis epoxy, average dry film thickness 70 μm.

• Material : Cast-iron
• Industry product standards : DIN EN 877
• Range Fire Classification : Euroclass A1
• Acoustic Performance : Lsc ≤ 10 dB(A) & LaA = 47 dB(A) according to EN 14366 with 2L/s.
• Percentage of Recycled Content : 99%
• Recycling Information : Cast iron is 100% recyclable through the existing recycling industrial network. 
  Data source: Environmental Product Declaration S-P-02013

No data available