Bend 68° x DN 150mm - SMU PLUS

Code article : 155419

Description

The short radius bends of the SMU PLUS range are cast iron fittings allowing a change of direction of the fluid, with the indicated angle and possible cutting area. These couplings are coated internally and externally with an anthracite grey polymerized epoxy powder coating (300μm on average).

Product variants

Article DN dn Angle Length Height Width Weight
155355 1 - 68 159 176 110 1.8
155452 2 - 68 277 295 210 7.8
155497 3 - 68 406 423 326 20
155305 5 - 68 104 123 58 0.8
155419 15 - 68 219 237 160 4.1
155480 25 - 68 343 358 274 14.7
155324 75 - 68 131 149 83 1
155394 125 - 68 188 205 135 3

All dimensions are in mm and nominal weights are in kg

Technical infos & product description

Product description

The short radius bends of the SMU PLUS range are cast iron fittings allowing a change of direction of the fluid, with the indicated angle and possible cutting area. These couplings are coated internally and externally with an anthracite grey polymerized epoxy powder coating (300μm on average).

Recommended use :

  • Aggressive effluents
  • Fat Wastewater
  • Hot effluents
  • Industrial Wastewater
  • Corrosive atmosphere

Major benefits :

  • Performances guaranteed with marks delivered by third party.
  • Long lasting operational safety thanks to the robustness and stiffness (around 700kN.m) of cast iron and usage of flexible mechanical couplings.
  • High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
  • Best acoustic comfort.
  • Easiness of installation due to mechanical couplings assembled with simple tools.

Technical infos

  • Hot water resistance : 24h at 95°C.
  • Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
  • Chemical resistance for 2 ≤ pH ≤ 13, up to 80°C.
  • Salt spray resistance : 1500h.

Coating description :

  • External coating :
    • Grey, anti-corrosive acrylic primer paint, average dry film thickness of 40 μm
    • Anti-corrosive zinc coating of 130gr/m2
  • Internal coating : Two-component
  • Material : Cast-iron made with De Lavaud process
  • Industry product standards : NF EN877
  • Range Fire Classification : A2-s1,d0
  • Acoustic Performance : Lsc ≤ 5dB(A) according to EN 14366
  • Percentage of Recycled Content : 97%
  • Recycling Information : 100% Recyclable