Bend 22° x DN 300mm - SMU PLUS

Code article : 155499

Description

The short radius bends of the SMU PLUS range are cast iron fittings allowing a change of direction of the fluid, with the indicated angle and possible cutting area. These couplings are coated internally and externally with an anthracite grey polymerized epoxy powder coating (300μm on average).

Product variants

Article DN dn Angle Length Height Width Weight
155308 50 - 22 70 88 58 0.45
155327 75 - 22 97 105 83 0.8
155358 100 - 22 126 125 110 1.3
155396 125 - 22 152 143 135 1.9
155421 150 - 22 179 162 160 2.6
155455 200 - 22 233 200 210 4.4
155482 250 - 22 300 240 274 9.5
155499 300 - 22 356 279 326 15.3

All dimensions are in mm and nominal weights are in kg

Technical infos & product description

Product description

The short radius bends of the SMU PLUS range are cast iron fittings allowing a change of direction of the fluid, with the indicated angle and possible cutting area. These couplings are coated internally and externally with an anthracite grey polymerized epoxy powder coating (300μm on average).

Recommended use :

  • Aggressive effluents
  • Fat Wastewater
  • Hot effluents
  • Industrial Wastewater
  • Corrosive atmosphere

Major benefits :

  • Performances guaranteed with marks delivered by third party.
  • Long lasting operational safety thanks to the robustness and stiffness (around 700kN.m) of cast iron and usage of flexible mechanical couplings.
  • High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
  • Best acoustic comfort.
  • Easiness of installation due to mechanical couplings assembled with simple tools.

Technical infos

  • Hot water resistance : 24h at 95°C.
  • Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
  • Chemical resistance for 2 ≤ pH ≤ 13, up to 80°C.
  • Salt spray resistance : 1500h.

Coating description :

  • External coating :
    • Grey, anti-corrosive acrylic primer paint, average dry film thickness of 40 μm
    • Anti-corrosive zinc coating of 130gr/m2
  • Internal coating : Two-component
  • Material : Cast-iron made with De Lavaud process
  • Industry product standards : NF EN877
  • Range Fire Classification : A2-s1,d0
  • Acoustic Performance : Lsc ≤ 5dB(A) according to EN 14366
  • Percentage of Recycled Content : 97%
  • Recycling Information : 100% Recyclable