Bend 45° x DN 125 - SMU S
Code article : 156756
All dimensions are in mm and nominal weights are in kg
Technical infos & product description
The short radius bends of the SMU S range allows a change of direction of the conveyed fluid, with the indicated angle, while maintaining quality and reliability, thanks to the brown-red epoxy film deposited by cataphoresis used in the coating.
Recommended use :
- Valve water
Major benefits :
- Performances guaranteed with marks delivered by third party.
- High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
- Best acoustic comfort.
- Easiness of installation due to mechanical couplings assembled with simple tools.
- Adaptable to all configurations with available accessories connecting cast iron with other materials.
- Limited maintenance operation thanks to technical and mechanical properties of cast iron.
- Hot water resistance: 24h at 95°C.
- Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
- Chemical resistance for 2 ≤ pH ≤ 12.
- Salt spray resistance: more than 350h.
Coating description :
External coating : Red-brown, anti-corrosive acrylic primer paint, average dry film thickness 40 μm.
Internal coating : Two-component ochre colored epoxy coating, average dry film thickness of 130 μm.
- Material : Cast-iron made with De Lavaud process
- Industry product standards : NF EN877
- Range Fire Classification : A1
- Acoustic Performance : Lsc ≤ 5dB(A) according to EN 14366
- Percentage of Recycled Content : 99%
- Recycling Information : Virtually 100% Recyclable
Tutoriels & videos