Pipe DN 400 x 2M80 - SMU PLUS

Code article : 224507

Description

Solid and long-lasting, the quality of SMU PLUS Pipe coatings ensure peace of mind. The SMU PLUS range is classified A2-s1,d0 according to the European Euroclass classification and has remarkable intrinsic flame and fire barrier properties. Due to their material and design, SMU PLUS pipes have exceptional acoustic performance, well above regulatory requirements. Completely and indefinitely recyclable at the end of its life, without loss of property, SMU PLUS pipes perfectly illustrate the virtues of a circular economy.

Product variants

Article DN dn Angle Length Height Width Weight
224507 400 - - 2800 429 429 167.5

All dimensions are in mm and nominal weights are in kg

Technical infos & product description

Product description

Solid and long-lasting, the quality of SMU PLUS Pipe coatings ensure peace of mind. The SMU PLUS range is classified A2-s1,d0 according to the European Euroclass classification and has remarkable intrinsic flame and fire barrier properties. Due to their material and design, SMU PLUS pipes have exceptional acoustic performance, well above regulatory requirements. Completely and indefinitely recyclable at the end of its life, without loss of property, SMU PLUS pipes perfectly illustrate the virtues of a circular economy.

Recommended use :

  • Aggressive effluents
  • Fat Wastewater
  • Industrial Wastewater
  • Hot effluents
  • Corrosive atmosphere

Major benefits :

  • Performances guaranteed with marks delivered by third party.
  • Long lasting operational safety thanks to the robustness and stiffness (around 700kN.m) of cast iron and usage of flexible mechanical couplings.
  • High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
  • Best acoustic comfort.
  • Easiness of installation due to mechanical couplings assembled with simple tools.

Technical infos

  • Hot water resistance : 24h at 95°C.
  • Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
  • Chemical resistance for 1 ≤ pH ≤ 13, up to 80°C.
  • Salt spray resistance : 3000h.
  • External coating resistance : more than 2000h salt spray test

Coating description :

  • External coating : Grey, anti-corrosive acrylic primer paint, average dry filmthickness of 40 μm.
  • Anti-corrosive zinc coating of 130gr/m2
  • Internal coating : two-component ochre-coloured epoxy coating, average dry film thickness of 250 μm.
  • Material : Cast-iron made with De Lavaud process
  • Industry product standards : NF EN877
  • Range Fire Classification : A2-s1,d0
  • Acoustic Performance : Lsc ≤ 5dB(A) according to EN 14366
  • Percentage of Recycled Content : 99%
  • Recycling Information : 100% Recyclable